|
Product Details:
Payment & Shipping Terms:
|
| Outside Diameter: | 1/2"-12" | Thickness: | Sch10s -sch160 |
|---|---|---|---|
| Material: | Stainless Steel | Other Name: | Stainless Steel Pipe Fittings |
| Name: | Tee | Technology: | Seamless |
| Type: | Equal And Reducing | Steel Grade: | F52 S32950 |
| Connection: | Butt Welding | ||
| High Light: | Sch10s Duplex Steel Pipe Fittings,F52 Duplex Steel Pipe Fittings,S32950 tee dimensions asme b16 9 |
||
Super duplex Stainless Steel pipe tee F52 UNS S32950 Butt weld pipe fittings ASME B16.9
"Zheheng steel" specializes in producing Super duplex stainless steel equal tee, reducing tee, reducing pipe (eccentric, concentric), flanging, pipe cap, flange.This product strictly follows ASTM ASME B16.9 DIN, JIS and other standards.The materials used are F52 S32950 and other stainless steel materials.
UNS S32950 Stainless Steel pipe tee fittings
S32950 stainless steel pipe tee is a duplex stainless steel formulated for primary forming into wrought products. Cited properties are appropriate for the annealed condition.
It has a fairly low ductility among wrought duplex stainless steels. In addition, it has a moderately high thermal conductivity and a moderately low electrical conductivity.
The graph bars on the material properties cards below compare S32950 stainless steel pipe tee to: wrought duplex stainless steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Product range:
SUPER DUPLEX STEEL UNS S32950 Stainless steel pipe tee CHEMICAL COMPOSITION
| Element | S32950 |
| P | 0.035 |
| S | 0.02 |
| C | 0.03 |
| Si | 0.8 |
| Mn | 1.2 |
| Ni | 6.00/8.00 |
| Cr | 24.0/26.0 |
| Mo | 3.0/5.0 |
| N | 0.24/0.32 |
| Other | Cu:0.50 |
UNS S32950 Super duplex stainless steel pipe tee fittings MECHANICAL PROPERTIES
| Element | S32950 |
| Proof Stress 0.2% (MPa) | 550 |
| Elongation A5(%) | 15 |
| Tensile Strength(MPa) | 795 |
| Hardness Max (HB-HRB) | 310-32 |
Dimensions of Straight Tees and Crosses
| Nominal Pipe Size (NPS) | Outside Diameter at Bevel | Center-to-End | |
| Run, C | Outlet, | ||
| M | |||
| [Notes ⑴ and ⑵] | |||
| 1/2” | 21.3 | 25 | 25 |
| 3/4” | 26.7 | 29 | 29 |
| 1 | 33.4 | 38 | 38 |
| 1-1/4” | 42.2 | 48 | 48 |
| 1-1/2” | 48.3 | 57 | 57 |
| 2 | 60.3 | 64 | 64 |
| 2-1/2” | 73 | 76 | 76 |
| 3 | 88.9 | 86 | 86 |
| 3-1/2” | 101.6 | 95 | 95 |
| 4 | 114.3 | 105 | 105 |
| 5 | 141.3 | 124 | 124 |
| 6 | 168.3 | 143 | 143 |
| 8 | 219.1 | 178 | 178 |
| 10 | 273 | 216 | 216 |
| 12 | 323.8 | 254 | 254 |
GENERAL NOTE: All dimensions are in millimeters.
NOTES:
(1)Outlet dimension M for NPS 26 and larger is recommended but not required.
(2)Dimensions applicable to crosses NPS 24 and smaller.
Application:
The products of "zheheng steel" are widely used in paper making, shipbuilding, petroleum, chemical industry, electric power, biological engineering, natural gas, sewage, construction, medicine, food (dairy) and other industries."zheheng steel" products are popular in Europe, America, Japan, Malaysia, Middle East, Vietnam and other international markets, and has achieved good market share and customer satisfaction.In line with the quality immortal, the credit eternal purpose, with the good faith to create the customer's trust, with the quality to meet the customer's requirements, with good after-sales service to solve the customer's worries.
Products show:
Contact Person: Mr. Bain
Tel: 0086 15858820108
Fax: 86-577-86655371
| Factory Address:No198,canglan Road,binhai industry Park,wenzhou ,zhejiang china | |
| Sales office:No 999,Airport Road,wenzhou industry park,zhejiang china | |
| +86-577-86655372 | |
| sales@zhehengsteel.com | |
