|
Product Details:
Payment & Shipping Terms:
|
| Outside Diameter: | 1/2"-24" | Thickness: | Sch10s-xxs |
|---|---|---|---|
| Material: | Stainless Steel,duplex Steel ,nickel Alloy | Welding: | Butt Welding |
| Techincs: | Cold Forming | Standard: | WP904L N08904(904L) S31254(254SMO) |
| Application: | Chemical,oil,gas And So On | Material: | Duplex Stainless Steel |
| Highlight: | WP904L 3 inch steel pipe cap,SCH10 3 inch steel pipe cap,SCH10 steel tube cap |
||
WP904L N08904(904L) S31254(254SMO) Duplex Alloy Stainless Steel Pipe Caps Pipe Fittings
| Austenitic Stainless Steel | Duplex Steel | Super Stainless Steel |
| ASTM SERIES | ||
| A403: | A815: | A403: |
| WP304, WP304H, WP304L, WP304N | WPS31803(UNS S31803) | N08904(904L) |
| WP309, WP310S, WP316, WP316H, WP316L, WP316N | WPS32750(UNS S32750) | S31254(254SMO) |
| WP317, WP317L, WP321, WP321H, WP347, WP347H | WPS32760(UNS S32760) | |
| WPNIC, WPNIC11, WP348, WP348H, WP700 | WPS32205(UNS S32205), | |
| WP304LN, WP316LN, WP347LN, WP6XN, WP20CB | ||
| WP1925, WP1925N, WPS31725, WPS31726, WPS31727 | ||
| WPS31730, WPS32053, WPS33228, WPS34565, WPS38815 | ||
| 304/304L, 316/316L,317/317L, 321/321H | ||
| EN/DIN SERIES | ||
| 1.4301(X5CrNi1810), 1.4306(X2CrNi1911), | 1.4462(X2CrNiMoN22-5-3), | 1.4539(X2NiCrMoCu25-20-5) |
| 1.4301H(X5CrNBi1810H), 1.4311(X2CrNiN1810) | 1.4410(X2CrNiMoN25-7-4) | 1.4547(X2NiCrMoCu20-18-7) |
| 1.4845(X12CrNi2521), 1.4401(X5CrNiMo17122) | 1.4501(X2CrNiMoCuWN25-7-4) | |
| 1.4404(X2CrNiMo171321), 1.4919(X6CrNiMo1713) | ||
| 1.4406(X2CrNiMoN17122), 1.4571(X6CrNiMoTi17122) | ||
| 1.4438(X2CrNIMo18164), 1.4449(X5CrNiMo1713) | ||
| 1.4541(X6CrNiTi1810), 1.4541H(X6CrNiTi1810H) | ||
| 1.4550(X6CrNiNb1810), 1.4961(X8CrNiNb16-13) | ||
| ASTM UNS SERIES | ||
| A403 S30400, S30409, S30403, S30451, S30900, S31008, S31600, S31609, S31603, S31651, S31700, S31703, S32100 | ||
| S32109, S34700, S34709, N08800, N08811, N08700, S30453, S31651, S34751, N08367, N08020, N08925, N08925N | ||
904L corrosion resistance
Since the carbon content of 904L is very low (maximum 0.020%), there is no carbide precipitation in the case of general heat treatment and welding. This eliminates the risk of intergranular corrosion after general heat treatment and welding. Due to the high chromium-nickel-molybdenum content and the addition of copper, 904L can be passivated even in a reducing environment, such as sulfuric acid and formic acid.
The high nickel content makes it have a lower corrosion rate in the active state. In pure sulfuric acid in the concentration range of 0~98%, the use temperature of 904L can be as high as 40 degrees Celsius. In pure phosphoric acid in the concentration range of 0~85%, its corrosion resistance is very good. In industrial phosphoric acid produced by the wet process, impurities have a strong influence on corrosion resistance. Among all kinds of phosphoric acid, 904L has better corrosion resistance than ordinary stainless steel. Among the highly oxidizing nitric acid, 904L has lower corrosion resistance than high-alloy steel grades that do not contain molybdenum. In hydrochloric acid, the use of 904L is limited to a lower concentration of 1-2%. In this concentration range. The corrosion resistance of 904L is better than conventional stainless steel.
904L steel has high resistance to pitting corrosion. Its resistance to crevice corrosion in chloride solutions is also very good. The high nickel content of 904L reduces the corrosion rate at pits and crevices. Ordinary austenitic stainless steels may be sensitive to stress corrosion in a chloride-rich environment at temperatures above 60 degrees Celsius. This sensitization can be reduced by increasing the nickel content of the stainless steel. Due to the high nickel content, 904L has high resistance to stress corrosion cracking in chloride solution, concentrated hydroxide solution and hydrogen sulfide-rich environment.
FAQ
1.Q:Are you a factory or trading company?
A: We are a factory, has more than 20 years experience in pipe fittings production.
2.Q:Where is your factory located? How can I visit there?
A: Our factory is located in wenzhou City, zhejiang Province,China.
3.Q:How does your factory do regarding quality control?
A: We are ISO9001& PED certified by TUV. We serious control the quality from raw material to finished pipe fittings. So that we can 100% sure our goods is qualified.
4. Q: Price high ?
A: Our price is workable. We had tried use auto equipment to save Workers cost, and control other costs. like human sources, logistics etc.
5.Q: After sales service.
A: Quality are promised. If our products are not meet the contract we would like to send free goods to you.
Contact Person: Mr. Bain
Tel: 0086 15858820108
Fax: 86-577-86655371
| Factory Address:No198,canglan Road,binhai industry Park,wenzhou ,zhejiang china | |
| Sales office:No 999,Airport Road,wenzhou industry park,zhejiang china | |
| +86-577-86655372 | |
| sales@zhehengsteel.com | |
